How to Install Your Santevia Shower Filter
Installing your Santevia Shower Filter is easy and takes just a few minutes. Follow the below listed steps or watch our set-up video to assemble and install your Shower Filter.
Insert: [How to Install Your Santevia Shower Filter Youtube embedded video]
What You’ll Need:
Santevia Shower Filter
Cartridge
Microfilter
Filtration media
Plumber’s (Teflon) tape
Adjustable wrench (optional)
Instructions:
Twist open the Shower Filter and cartridge lids.
Tear open the filtration media bag and pour into the cartridge.
Twist the cartridge lid back on.
Hold the cartridge under the bathroom faucet for 30 seconds or until water runs clear.
Place the microfilter in the bottom of the cartridge and twist the lid back on.
Place the cartridge inside the Shower Filter, and twist back together.
Unscrew the shower head from the wall pipe. Use an adjustable wrench if needed.
Apply two layers of plumber’s tape to the threads of the wall pipe.
Screw the Shower Filter onto the wall pipe.
Apply two layers of plumber’s tape to the threads of the Shower Filter.
Screw the shower head onto the Shower Filter.
Run the shower to check for leaks. Add more plumber’s tape to threads if necessary.