How do I prepare my Gravity Water System before use?

Before using your Gravity Water System for the first time please do the following:

Ceramic Pre-filter:

1. Soak in cool water for ten minutes.

2. Using the included grey scrub pad (or equivalent), scrub the top of the Ceramic Pre-filter using moderate pressure.

Fluoride Filter and 5-Stage Filter:

1. Run water through the top of the filter until the water runs clear out the bottom.

2. Shake the filter while running water through it. The purpose of this step is to remove any excess Granulated Activated Carbon (GAC) pieces.

Tip: place a white dish (e.g. a plate) in the sink under your filter. This will let you more easily see when the water from your filter runs clear!

Mineral Stones:

1. Rinse the Mineral Stones.

2. Place Mineral Stones in boiling water for one minute, then let them cool and dry.